Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateTrusted AC Installation for Fort Worth Homeowners
When a Fort Worth summer pushes 105 degrees and your old unit finally gives up, you need a straight answer: what will a new system cost, when can it be installed, and who’s showing up? Halden Heating and Air Fort Worth gives you all three before we ever touch your thermostat. Since 2004, Andre Fuller and our team have installed thousands of cooling systems across Tarrant County from Benbrook to Azle with one non-negotiable rule: a written price before any work starts. Book online, get a live arrival time, track your tech to the door, and skip the four-hour window entirely. Call (817) 632-5499 for a free installation estimate.
Furnace Installation
Furnace Installation means replacing or equipping your home with a gas or electric heating system that pushes warm air through your existing ductwork. You need this when your current furnace is over 15 years old, requires repeated repairs, or simply cannot keep your Fort Worth home warm during those January cold snaps. Halden Heating and Air Fort Worth installs furnaces with a written price locked before the work begins, and every install is covered by our 365-Day Done Right Promise. In Fort Worth, a furnace replacement most often falls between $3,500 and $7,500 depending on efficiency rating and size, so you get a clear number before making any commitment.
Sizing Done the Right Way
A furnace that’s too big short-cycles and wastes gas. Too small and it runs constantly without ever hitting your set temperature and wearing itself out years early. We run a full load calculation on every single quote, no shortcuts, so the number we give you is for the right unit, not a guess.
Efficiency That Pays Back
Fort Worth winters are mild compared to the north, but you’ll still notice the jump from an 80% to a 96% efficient furnace on your Atmos Energy bill. We’ll show you real numbers on energy savings for each option, then let you pick with zero pressure.
Styles & brands we work with
HVAC Installation
HVAC Installation is the complete replacement or first-time setup of your full heating and cooling system, the air conditioner and furnace working together through the same ductwork and thermostat. When both units are aging out, replacing them together saves you money and gives you a matched system that actually performs the way the manufacturer intended. Halden Heating and Air Fort Worth handles the entire job as one project with one written price, usually ranging from $3,500 to $7,500 for a full system in the Fort Worth market. No surprise line items when we show up.
Why a Matched System Matters
An old furnace paired with a new air conditioner is like putting new tires on one side of your truck. The mismatched efficiency means your energy bills stay high and your new unit works harder than it should. Replacing both together gets you a SEER-matched pair that cools and heats efficiently.
One Team, One Warranty
When one company installs both halves of your system, there’s no finger-pointing if something goes wrong. Your entire HVAC setup falls under our 365-Day Done Right Promise, and if anything we installed fails in that first year, we come back at no charge.
Heat Pump Installation
Heat Pump Installation is the process of installing a single system that both heats and cools your home by moving heat rather than burning fuel. It’s often the ideal choice for Fort Worth homes because our winters are mild enough that a heat pump handles most heating needs efficiently, while still delivering full air conditioning through the summer. Halden Heating and Air Fort Worth installs heat pump systems with the same upfront written price as every other job, typically in the $3,500 to $7,500 range for a complete Fort Worth installation. You’ll know the exact cost before you sign anything.
The Texas Climate Sweet Spot
Heat pumps shine in climates like Fort Worth’s. When temperatures stay above freezing, a modern heat pump delivers heat at a fraction of the cost of resistance coils or a gas furnace. During our brutal summers, it reverses and runs as a high-efficiency air conditioner.
Rebate and Tax Credit Help
Heat pumps qualify for federal tax credits and often local utility rebates that can put thousands back in your pocket. We’ll show you exactly which incentives apply to your installation and handle the paperwork so you don’t leave money on the table.
Ductless Mini Split Installation
Ductless Mini Split Installation is the process of adding individual wall-mounted cooling and heating units to specific rooms without needing ductwork. You need this when you’re adding a room, finishing a garage, or living with a room that never gets comfortable because your central system just doesn’t reach it. Halden Heating and Air Fort Worth installs ductless systems from brands like Daikin and Bryant, usually ranging from $3,500 to $7,500 depending on how many indoor units you need. Every job gets a written price before any work begins.
Zone Control Without the Reno
Running ductwork to a converted attic or a new addition costs serious money and tears up drywall. A ductless mini split gives you independent temperature control in that space with a small line-set run through the wall, not a full remodeling project.
Silent, Efficient, Independent
Each indoor unit runs independently, so you’re not cooling an entire 2,400-square-foot house just to make one bedroom comfortable. The outdoor units run quiet enough that you’ll forget they’re there, and they sip electricity compared to window units or space heaters.
AC Replacement
AC Replacement is swapping out your aging or failed air conditioner for a new, correctly sized unit matched to your home and your ductwork. You need this when your current system has crossed the 12 to 15 year mark, needs a compressor or coil replacement, or simply cannot hold temperature in August without running nonstop. Halden Heating and Air Fort Worth replaces air conditioners throughout Fort Worth with a written, locked price in your hand before the old unit is touched, typically between $3,500 and $7,500 for a complete replacement. Every replacement includes our 365-Day Done Right Promise.
Knowing When to Stop Repairing
If your system needs a repair that costs half of a new unit and it’s already past its tenth birthday, you’re better off replacing it. We’ll give you an honest repair-versus-replace recommendation with real numbers, not a sales script.
No Down-Time During Peak Season
Fort Worth summers don’t wait, and neither do our replacement crews. We stock the most common condenser and coil sizes locally so a straight replacement often happens within days of your quote, not weeks. You’ll get a set install date when you sign, not a window.
Central Air Conditioning Installation
Central Air Conditioning Installation means equipping your home with a whole-house cooling system that circulates conditioned air through ductwork to every room. You need this when you’re building a new home, adding central air to a house that only has window units, or your existing central system has finally reached the end of its service life. Halden Heating and Air Fort Worth handles Fort Worth AC Installation with a written price before work begins, typically $3,500 to $7,500 in the Fort Worth area depending on home size and efficiency rating. Your tech arrives with a live arrival time you can track to your door.
Ductwork Inspection Comes First
Your new central air system is only as good as the ducts it pushes through. Before we recommend a unit, we inspect your existing ductwork for leaks, sizing, and insulation. A 30% duct leak means you’re paying to cool your attic, and we’d rather tell you now than after the install.
SEER Ratings, Plain Talk
SEER is the efficiency rating, just like MPG on a truck. In Fort Worth, where your AC runs hard from May through October, moving from a 14 SEER to a 17 SEER unit can cut your summer cooling bill by 15 to 20 percent. We’ll show you the payback math in dollars, not jargon.
Brands We Service
Halden Heating and Air Fort Worth is factory-certified to install and service units from York, Daikin, Bryant, and American Standard, among others. We stock common OEM parts for York condensing units and Daikin compressors so repairs don’t stall waiting on a shipment. If you have a Bryant system that’s leaking refrigerant or an American Standard air handler that’s making noise, we know the unit’s common failure points before we even ring your doorbell.
Our techs train on new equipment releases every year and use manufacturer diagnostic software to pinpoint problems accurately. Whether you have a York heat pump in Benbrook or a Daikin mini-split in Keller, we’ll diagnose and fix it honestly and tell you if it’s worth the repair. Home comfort starts with honest guidance.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Your system runs but won’t cool below 80 degrees. This usually points to a refrigerant leak or a failing compressor. Running it in this state wastes electricity and can turn a $300 repair into a $3,500 replacement if the compressor seizes.
- You hear grinding, screeching, or banging from the outdoor unit. These sounds indicate failing bearings, a loose fan blade, or a compressor coming apart internally. The longer it runs, the more damage it does to the rest of the system.
- Your energy bill jumped 30% or more with no change in usage. This is your system screaming for help. A failing capacitor, low refrigerant, or clogged coil forces the unit to run far longer to hit the same temperature, and you pay for every extra hour.
- Warm air is blowing from the vents while the AC is set to cool. This can mean a failed reversing valve on a heat pump, a dead compressor, or a refrigerant charge that’s run dry. None of these fix themselves, and all of them get more expensive with time.
- Ice is forming on the indoor coil or the refrigerant lines. Ice signals low refrigerant or restricted airflow, and it’s actively destroying your compressor while it runs. Shut the system off and call us at (817) 632-5499 before the damage spreads.
Our Process, Step by Step
- 1
Book your visit online or by phone. You get a live arrival time you can track to your door, not a four-hour window. No phone tag, no waiting around wondering if anyone is coming.
- 2
We inspect your current system and home. Our tech runs a full load calculation on your home’s square footage, insulation, window count, and orientation, then inspects the existing ductwork and electrical setup. This is what separates a right-sized system from a guess.
- 3
You get a written, locked price. Before a single tool comes off the truck, you’ll have a line-item quote in writing. That price is the price, period. No surprises at the door, no “oh, this is going to be extra.”
- 4
Installation day, on schedule. You get a set install date when you approve the quote. Our crew arrives in uniform, runs background-checked, and walks you through what’s happening at each stage. The old unit gets hauled away, the new unit gets installed and tested for proper airflow and refrigerant charge.
- 5
We walk you through everything and stay accountable. After the install, we show you how to use the new thermostat, register your manufacturer warranty, and explain exactly what’s covered under our 365-Day Done Right Promise. If it’s not done right within a year, we make it right, no charge.
How Much Does AC Installation Cost in Fort Worth?
A complete AC Installation pricing in Fort Worth typically runs $3,500 to $7,500, with the final number driven by home size, efficiency rating, and whether you’re replacing the full HVAC system or just the cooling half. A compact 1,200-square-foot home in Haltom City getting a 14 SEER unit might land near the bottom of that range, while a 3,000-square-foot home in Southlake getting a high-efficiency two-stage system with a new air handler will push toward the top. The middle of the range covers most 1,800 to 2,400 square foot Fort Worth homes getting a solid 16 SEER replacement.
What affects your price most is the equipment efficiency tier, whether your ductwork needs repairs or modifications, and the difficulty of the install location. A rooftop unit over a second story costs more in labor than a ground-level pad in the backyard. Our free estimate includes a full inspection of your existing setup, so the number we quote includes everything from permits to disposal of the old unit to the final startup test.
To avoid overpaying, be wary of anyone quoting you a “one size fits all” price over the phone without seeing the house. And be equally wary of outrageously low quotes that skip load calculations and proper refrigerant charging, because those cut corners show up as higher energy bills and early failures. Call (817) 632-5499 for a free estimate with real numbers. AC Installation in Euless follows the same transparent pricing model.
Our Service Area Near Fort Worth
Halden Heating and Air installs air conditioners across Fort Worth and the surrounding Tarrant County communities including Euless, Keller, Southlake, Benbrook, Crowley, Azle, Kennedale, Lake Worth, River Oaks, Sansom Park, and Haltom City. Typical response times run under 90 minutes for most of the metro, and our live arrival tracking means you see your tech coming in real time on your phone. If you’re in the Fort Worth area and need a new system, we’ve got you. AC Installation in Keller is one of our busiest service corridors.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions About AC Installation in Fort Worth
AC installation is the process of replacing an old or failed air conditioner with a new unit sized to your home, or adding central air conditioning to a house that doesn’t have it. It involves a load calculation, equipment selection, removing the old unit if present, and installing and testing the new system. At Halden Heating and Air Fort Worth, every installation starts with a written price, so you know the full cost before any work begins.
Most straight AC replacements take one full day, roughly 5 to 8 hours depending on the complexity of the existing setup and whether ductwork modifications are needed. Add-ons like a new thermostat, new refrigerant lines, or electrical panel upgrades can extend the job to a second day. When we give you your written quote, we’ll also give you a realistic install date and timeline.
AC Installation in Kennedale and the broader Fort Worth area typically costs $3,500 to $7,500 depending on the size of your home, the efficiency rating of the unit, and whether you’re replacing the full system or just the cooling side. A smaller home with a standard efficiency unit lands at the lower end, while large homes with high-efficiency systems land at the upper end. Call (817) 632-5499 for a free, no-obligation written estimate with real numbers for your specific home.
Yes, we’re factory-certified to install and service York and Bryant systems, along with Daikin, American Standard, and other major brands. Our techs train on manufacturer-specific diagnostics and we stock common OEM parts so repairs and replacements don’t stall waiting on shipments. If you have a York heat pump or a Bryant condenser, we know the common failure points and the right fixes.
Yes, we keep same-day slots open for cooling emergencies during the Fort Worth summer, and our phones are answered by a live person 24/7. When your AC dies on a 100-degree day, call (817) 632-5499 and you’ll talk to a real human who can get a tech dispatched, not a voicemail tree. You’ll get a live arrival time you can track to your door.
Every AC installation from Halden Heating and Air Fort Worth comes with our 365-Day Done Right Promise: a full year of accountability on the completed job. If it’s not done right within that year, we make it right at no charge. You also get the manufacturer’s warranty on parts, which typically runs 10 years on the compressor when you register the unit, and we handle that registration paperwork for you.
Clear a path from the entry door to your HVAC equipment, move vehicles and obstacles away from the driveway so our crew can park and carry equipment, and secure pets in a separate room. Make sure an adult is home to let the crew in and be available for a short walkthrough at the end. We’ll handle the rest including refrigerant recovery, old unit removal, and cleanup.
Schedule Your AC Installation Service in Fort Worth Today
Ready to stop sweating through another Fort Worth summer? Call (817) 632-5499 or book online now for a free, no-obligation AC installation estimate. You’ll get a written price before any work starts, a set install date, and a live arrival time you can track to your door. Andre Fuller and the Halden Heating and Air Fort Worth team are ready when you are. AC Installation in Fort Worth has never been more straightforward.
Written by Andre Fuller, Owner at Halden Heating and Air Fort Worth, serving Fort Worth since 2004.