Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateTrusted Furnace Repair for Fort Worth Homeowners
When your furnace quits on a 32-degree January night in Fort Worth, you need a straight answer and a fast fix. Furnace repair in Fort Worth typically runs $150 – $700 depending on the failing part, and most jobs are handled the same day. We’ve been at this since 2004, and we run every repair the same way: a written price before any tool comes off the truck, a background-checked technician you can track to your door, and a 365-Day Done Right Promise that says we’ll make it right if something slips. Andre Fuller leads our Fort Worth team, and we answer the phone 24/7 at (817) 632-5499.
Most furnaces give warning signs before they die, and catching those early saves real money. But when the heat’s already out, you don’t want a four-hour window and a surprise bill at the door. You want to know who’s coming, when they’ll arrive, and what it costs before work starts. That’s how we operate on every Fort Worth Furnace Repair job, from an igniter swap in a Trane unit to a full blower motor replacement in a Goodman.
Furnace Maintenance
Furnace Maintenance is the scheduled service that keeps your heating system clean, safe, and running at its best, and it runs between $80 and $200 for a thorough tune-up in Fort Worth. We recommend it every fall before the first real cold snap, because a maintained furnace burns less gas, throws fewer surprises, and lasts longer. Our technicians inspect the heat exchanger, test the flame sensor, check gas pressure, and measure temperature rise across the system. They also clean the burners, tighten electrical connections, and verify the system starts and stops correctly.
What We Check During a Tune-Up
We run through a 21-point checklist on every furnace maintenance visit, including the inducer motor, pressure switch, rollout safety switches, and thermostat calibration. Our technician will also point out anything that’s wearing prematurely, so you can budget for a repair before it becomes a no-heat emergency at midnight.
Why Fort Worth Dust Makes Maintenance Critical
Homes across Tarrant County deal with fine clay dust that settles into blower wheels and clogs air filters faster than you’d expect. A dirty blower wheel can cut airflow by 20 percent or more, which makes the furnace work harder and shortens the life of the heat exchanger. A yearly tune-up catches that buildup before it does damage.
Styles & brands we work with
Heat Pump Repair
Heat Pump Repair covers systems that both heat and cool your home, and in Fort Worth it usually runs $150 – $650 depending on whether the problem is electrical, refrigerant-related, or mechanical. Many Texas homes use heat pumps instead of gas furnaces, and these systems run nearly year-round, which means wear adds up faster. When a heat pump can’t keep up on a cold night, we diagnose the issue with manifold gauges and multimeters on-site and explain exactly what failed and what it costs to fix.
Common Heat Pump Failures We See
Reversing valve failures, failed capacitors, and low refrigerant are the three most common heat pump breakdowns we repair in Fort Worth. A reversing valve failure looks a lot like a compressor problem, but costs much less to fix, so a precise diagnosis matters.
When to Call for Heat Pump Repair
If your unit is constantly running, blowing lukewarm air, or icing up in heating mode, don’t wait. Ice buildup on the outdoor coil in winter is a sign the defrost cycle isn’t working, and that condition will get worse fast. Halden Heating and Air Fort Worth schedules same-day repair calls for heat pumps all winter.
Heating Repair
Heating Repair covers any failure in the system that keeps your home warm in cold weather, and in Fort Worth that work typically falls between $150 and $700. It could be a furnace, a heat pump, or a dual-fuel system, and the fix might involve anything from a $12 capacitor to a full circuit board replacement. Our techs carry repair parts for Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard systems, so most jobs are handled in one visit.
How We Diagnose a Heating Failure
Every heating repair call starts with a full system diagnostic using a digital multimeter, manometer, and combustion analyzer on gas units. We measure gas pressure at the manifold, test every safety switch in sequence, and check the blower motor amperage draw before recommending anything.
Written Pricing on Every Heating Repair
Before any work begins, you get a written price with parts and labor separated. If the actual repair runs less once the system is open, you pay the lower amount. That’s how it should work in Fort Worth, and we’ve never run it another way.
Boiler Repair
Boiler Repair is the service for hydronic heating systems that circulate hot water through radiators or in-floor loops, and repair costs in Fort Worth typically run $150 – $700. Boilers are less common in Tarrant County than forced-air systems, but neighborhoods like Mistletoe Heights and Arlington Heights still have plenty of them, and nearby homeowners looking for Furnace Repair - Haltom City can rely on us for both boiler and forced-air service. Common failures include circulator pump seizures, pressure relief valve leaks, air-locked radiators, and zone valve failures.
Boiler Systems We Service
We work on both cast-iron and condensing boilers, including combination boilers that handle domestic hot water as well as space heating. A boiler that’s short-cycling, making knocking sounds, or losing pressure needs attention before a small leak turns into water damage.
Why Boiler Pressure Matters
Low boiler pressure usually points to a leak somewhere in the loop, and high pressure can stress the relief valve and internal seals. During every boiler repair, we check system pressure, test the expansion tank, and bleed air from the radiators if needed. Halden Heating and Air Fort Worth has parts on hand for most major boiler brands.
Gas Furnace Repair
Gas Furnace Repair focuses on the most common heating system in Fort Worth homes, and the work typically costs $150 – $700 depending on whether we’re replacing an igniter, repairing a gas valve, or swapping a control board. Gas furnaces generate heat by burning natural gas, and that means safe, precise work matters every time. We test for gas leaks, verify proper combustion, and inspect the heat exchanger for cracks on every gas furnace repair call.
Safety note: Gas furnaces involve natural gas, high voltage, and combustion byproducts including carbon monoxide. Diagnosing and repairing these systems requires a trained professional with proper testing equipment. We always check carbon monoxide levels in the flue and confirm the pressure switch and limit switches are working before and after any repair.
What a Gas Furnace Repair Includes
Each repair starts with a combustion analysis and a sequence-of-operation test, which tells us exactly which component is interrupting the heating cycle. It’s methodical, not guesswork. Then we explain what failed, show you the bad part, and hand you a written price.
Common Gas Furnace Failures in Fort Worth
The most common issues we see are dirty flame sensors, failed igniters, and condensate drain blockages in high-efficiency 90+ percent furnaces. A flame sensor failure causes short-cycling, which wastes gas and stresses the ignition components. We keep igniters and flame sensors for most major brands on the truck.
Furnace Tune Up
A Furnace Tune Up is a preventive service that cleans and adjusts your heating system so it runs efficiently and safely, priced between $80 and $200 in Fort Worth. It’s the single best way to avoid a mid-winter breakdown, and it also keeps your utility bills in check. We recommend one tune-up each fall before heating season really starts, especially for gas furnaces and heat pumps that ran hard through the previous winter.
What a Flat-Price Tune-Up Covers
Our flat-rate tune-up includes cleaning the burners, checking the heat exchanger, testing the igniter and flame sensor, verifying gas pressure, checking the blower motor and capacitor, and testing the thermostat and all safety controls. You get a written report showing what we found and any maintenance items we recommend, with no sales pressure attached.
Why a Clean Furnace Costs Less to Run
A furnace with a dirty burner or clogged filter can burn 5 to 10 percent more gas than a clean one. Over a Fort Worth winter, that’s real money. Plus, small issues caught during a tune-up, like a weak capacitor or a corroded flame sensor, are cheap fixes compared to a full breakdown on a freezing night.
Emergency Furnace Repair
Emergency Furnace Repair is same-day service for no-heat situations, and in Fort Worth it costs the same $150 – $700 range as regular repair because we don’t charge overtime rates. We also provide Furnace Repair in Kennedale with the same flat-rate pricing and 24/7 availability. When the temperature drops below 40 degrees and your furnace won’t start, a cold house isn’t just uncomfortable, it can become dangerous for kids, older adults, and anyone with health conditions. We answer live 24/7, and a real person schedules your call immediately.
What Counts as a Furnace Emergency
No heat at all, a burning smell, or a carbon monoxide alarm going off are all reasons to call us right away. If your CO detector activates, shut the furnace off, open windows, and leave the house until a professional can inspect it. Call us from outside or after ventilating, and we’ll send a technician immediately.
Same-Day Furnace Repair Process
You call, we dispatch a background-checked technician with a live arrival time you can track on your phone. The tech confirms the diagnosis, shows you the written price, and in most cases completes the repair on the first visit. Every emergency repair still includes our 365-Day Done Right Promise and a written guarantee.
Brands We Service
Our technicians are certified to service and repair furnaces and heat pumps from Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. We’ve repaired thousands of units across these brands in the Fort Worth area, and we know their failure patterns and common pain points.
We routinely stock OEM igniters, flame sensors, pressure switches, and control boards for York and Daikin units, which are two of the most common brands in newer Fort Worth construction. American Standard and Bryant furnaces also show up regularly in older neighborhoods like Wedgwood and Ridglea Hills, while our Furnace Repair in Keller covers newer subdivisions and established homes throughout that area. Whether your system is one of those or any other make, our techs have the training and diagnostic equipment to get it heating again.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- No heat or intermittent heat. A furnace that won’t start, or starts and stops every few minutes, is telling you something failed. It could be a flame sensor, an igniter, or a failing control board. Waiting usually means the part gets worse and the repair gets more expensive.
- Burning smell when the furnace runs. A dusty burning smell early in the season is normal for about 30 minutes. A persistent burning or plastic smell is not. Shut the system down and call us at (817) 632-5499.
- Strange noises. Banging, grinding, or screeching means something mechanical is failing. A failing blower motor or inducer motor will often make noise for weeks before it finally quits on the coldest night of the year.
- Unusually high gas bills. If your bill jumped and your usage hasn’t changed, the furnace is probably running inefficiently. A dirty burner, failing igniter, or restricted airflow all waste gas. A diagnostic call is cheaper than another month of inflated bills.
- Carbon monoxide detector going off. This is the most serious sign. Open windows, leave the house, and call us once you’re outside. A cracked heat exchanger can leak CO into your living space, and that’s a life-safety issue no one should ignore.
Our Process, Step by Step
- 1
Book online or call 24/7. You can schedule through our online booking or call (817) 632-5499 and talk to a live person any time, day or night. You’ll get a confirmed appointment and a live arrival time you can track on your phone.
- 2
Diagnostic and system evaluation. Your technician arrives on time and runs a full diagnostic using a digital multimeter, manometer, and combustion analyzer. We test every component in sequence and identify exactly what failed, plus anything else wearing down.
- 3
Written price before any work. Once we know what’s wrong, you get a written price with parts and labor separated. No work starts until you approve it. If we find the repair is simpler than expected, you pay the lower amount.
- 4
Repair and testing. We complete the repair, then run the furnace through several full heating cycles to confirm it’s operating safely and efficiently. We check gas pressure, temperature rise, and carbon monoxide levels before we leave.
- 5
Written guarantee and documentation. Every repair includes a written guarantee, and our 365-Day Done Right Promise covers the work for a full year. If the repair fails within the coverage window, we come back at no charge. You get a record of everything we did.
How Much Does Furnace Repair Cost in Fort Worth?
Furnace repair in Fort Worth typically costs between $150 and $700, with the final price determined by which part failed and how accessible it is. A straightforward igniter replacement usually lands around $150 – $250. A blower motor replacement runs $400 – $650 on most systems. A control board replacement typically falls between $300 and $550 depending on the brand and availability.
Several factors affect the final price. High-efficiency furnaces with sealed combustion chambers often take longer to open and reassemble, which adds labor time. OEM parts cost more than aftermarket, but they last longer and match your system exactly. Older furnaces sometimes have corroded fasteners or tight access, which adds time. The best way to get an accurate number is a diagnostic visit; we’ll show you the failed part, explain the repair, and give you a written quote you can approve or decline.
Our free estimates cover the diagnostic and the written quote. If you approve the repair, the diagnostic fee is waived. To avoid overpaying, don’t wait until a small failure becomes a cascading one; an igniter that fails repeatedly often points to a dirty flame sensor, and fixing the sensor is far cheaper than replacing the igniter again. Call us at (817) 632-5499 for a straight answer and a written price.
Our Service Area Near Fort Worth
Halden Heating and Air Fort Worth serves all of Fort Worth and surrounding Tarrant County communities, including Furnace Repair in Euless, Furnace Repair in Keller, Southlake, Benbrook, Crowley, Azle, Kennedale, Lake Worth, River Oaks, Sansom Park, and Haltom City. Typical response time is under two hours in most of the Fort Worth metro, and our technicians arrive with a live tracking link so you know exactly when they’ll pull up.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Furnace Repair in Fort Worth
Furnace repair is the diagnosis and replacement of failed components in a heating system, including igniters, flame sensors, blower motors, control boards, pressure switches, and gas valves. It also covers safety checks and performance testing to confirm the system is running correctly after the fix. Call (817) 632-5499 for a free estimate.
Most furnace repairs take 1 to 2 hours once the technician has diagnosed the problem. Repairs requiring a part we don’t have on the truck may take a short parts trip or a next-day return visit. We stock common parts for most major brands, so most jobs are completed in one visit.
Most furnace repairs in Fort Worth run between $150 and $700 depending on the failed component. A simple igniter replacement is usually under $250, while a blower motor or control board replacement lands in the $400 – $650 range. You’ll get a written quote before any work starts.
Yes, our technicians are certified to service and repair furnaces from Trane, Carrier, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. We know these systems well and stock OEM parts for many of them. If you have another brand, we can almost certainly repair that too.
Yes, we provide emergency furnace repair 24 hours a day, 7 days a week in Fort Worth. We answer live, no voicemail trees, and dispatch a technician with a live arrival time you can track. Emergency repairs cost the same as regular service; we don’t charge overtime rates.
Every repair includes a written guarantee, and the 365-Day Done Right Promise covers the work for a full year. If the repair fails within the coverage window, we come back at no charge. You don’t have to ask for it; it’s included automatically on every job.
Clear the area around the furnace, make sure the breaker hasn’t tripped, and have your thermostat set to heat so the tech can test the system. If you have a carbon monoxide alarm going off, shut the system down, ventilate, and wait outside until we arrive. We’ll handle the rest.
Schedule Your Furnace Repair Service in Fort Worth Today
When the heat goes out in Fort Worth, you don’t have to wait through a four-hour window for a vague estimate. Call (817) 632-5499 now and talk to a live person 24/7. You’ll get a written price before any work starts, a live arrival time you can track, and a repair guaranteed for a full year. No surprises, no runaround, no obligation.
Written by Andre Fuller, Owner at Halden Heating and Air Fort Worth, serving Fort Worth since 2004.