Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterAC Replacement in Fort Worth, TX
AC replacement in Fort Worth costs between $6,500 and $14,500 for a complete system swap in most single-family homes, depending on home size, efficiency rating, and existing ductwork condition. Most full replacements are done in a single day. Halden Heating and Air Fort Worth gives you a written price before any equipment gets ordered, so you know the real number up front – not an estimate that shifts once the crew arrives.
If your system is over 12 years old, needs Compressor Repair, or has sprung a refrigerant leak on an R-22 unit, replacing it usually beats repairing it. We handle the whole process: load calculation, equipment selection, removal of the old system, installation, and registration of your manufacturer warranty. You can book online, get a live arrival time, and track your technician to the door. If you want to talk through your options first, call (817) 632-5499 and you’ll reach a real person, day or night.
Replacement is the bigger decision compared to a standard repair or tune-up, and the price spread is wide enough that you want someone who won’t hide numbers. That’s where the AC Repair & Installation in Fort Worth process at Halden matters: every recommendation comes with a locked written quote before work starts, not a ballpark.
When You Need AC Replacement
Some failures are repairable. Others mean you’re putting money into a machine that’s already losing the fight against a Fort Worth summer. Here’s what pushes most homeowners toward replacement:
- Your system uses R-22 refrigerant (Freon). Production of R-22 stopped years ago, so the remaining supply is scarce and expensive. In neighborhoods like Wedgwood and Ridglea, an R-22 recharge alone can run several hundred dollars per pound – and that’s wasted money if the unit leaks again.
- The compressor failed. The compressor is the heart of the system. On a 10+ year old unit, compressor replacement often costs 40-60% of a full system swap. At that point, you’re buying time on borrowed equipment.
- Repair bills keep stacking up. If you’ve spent more than $800 on repairs in the last two years and the system is approaching 12-15 years old, the math starts tilting toward replacement.
- Electric bills have climbed even though usage hasn’t changed. An aging AC loses efficiency slowly until it drops off a cliff. A new high-efficiency system can cut cooling costs by 20-40% compared to a 15 year old unit.
- Uneven temperatures and constant cycling. If some rooms in your 76116 or 76107 home stay hot while the thermostat says it’s cooling, you’ve got either duct problems, a failing blower, or an undersized system. Sometimes the right fix is replacement with proper sizing.
- Frequent breakdowns during peak heat. When your AC goes down during a triple-digit Fort Worth July, you don’t want to keep waiting on another patch job. At some point, a replacement is cheaper than the next emergency repair.
Our AC Replacement Process
Here’s exactly how replacement works with Halden Heating and Air Fort Worth, from first call to cold air moving through your registers:
- Book online or call (817) 632-5499. You’ll get a live arrival time and a technician’s name before they head your way. No four-hour windows. If it’s an emergency, we run the same process at night or on weekends.
- We size the system properly. We don’t guess based on the old unit’s tonnage. We run a load calculation that accounts for your home’s square footage, window orientation, insulation levels, and Fort Worth’s specific heat profile. An oversized AC short-cycles and leaves humidity in the air; an undersized one can’t keep up. Both waste money.
- You get a written, locked price. Before any equipment is ordered, you see the full breakdown: equipment, materials, labor, refrigerant, and haul-away. That number doesn’t move. This is The Relay Standard at work, and it’s backed by The Relay Visibility Guarantee.
- We do the install. Our background-checked, uniformed technicians remove the old system, install the new one, and show you before-and-after photos so you can see the work that went on where you can’t easily look. We service major brands including Bryant, American Standard, and Daikin, but the right brand for your home depends on your budget, your efficiency goals, and what fits your existing setup.
- We register your warranty and walk you through the thermostat. Before we leave, you’ll know how to operate the new system. Your manufacturer warranty registration gets filed same day. And every completed job carries the 365-Day Done Right Promise: if it’s not done right, we make it right.
AC Replacement Pricing in Fort Worth
Replacement pricing in Fort Worth varies more than repair pricing because you’re choosing equipment, not just paying for labor. Here’s what you can expect to see:
- Basic 14-16 SEER single-stage system: $6,500 – $8,500 installed. Solid efficiency, great for tight budgets, much better than a 12 year old unit.
- Mid-range 16-18 SEER system: $8,500 – $11,000 installed. A meaningful jump in summer energy savings, often with dual-stage cooling that holds temperature more evenly.
- High-efficiency 18-22 SEER or variable-speed system: $11,000 – $14,500+ installed. Quietest operation, best humidity control, highest rebates from manufacturers and local utilities.
- Ductwork replacement (if needed): $4,000 – $8,000 depending on home size and accessibility. Adding this is common when an older home’s ducts have leaks or poor insulation.
Three things push the number up or down in Fort Worth specifically: the size of your home (a 1,400 sq ft ranch in Ryan Place needs less cooling than a 3,200 sq ft two-story in Overton Park), the condition of your ducts, and attic accessibility. A tight attic with a scuttle hole adds labor hours. Existing ductwork in good shape saves you money.
We also register any applicable manufacturer rebates and local utility incentives for you. York, Daikin, Bryant, and American Standard periodically run rebates that change what you actually pay. We’ll tell you what applies to your install. Call (817) 632-5499 and we’ll walk through your home’s specifics – estimates are free and the number you get is the number you’ll pay.
FAQs – AC Replacement
How much does AC replacement cost in Fort Worth?
AC replacement in Fort Worth typically runs $6,500 to $14,500 depending on home size, system efficiency, ductwork condition, and brand choice. Basic 14-16 SEER systems land at the lower end; high-efficiency variable-speed systems and full duct replacement push toward the top. The exact price for your home comes after a load calculation and equipment selection – and you get it in writing before work starts. Call (817) 632-5499 for a free estimate with a locked price.
Is it cheaper to repair or replace my AC?
If your system is under 8 years old and the repair is a Capacitor Replacement, contactor, fan motor, or similar component, repair usually wins. If the compressor fails or you have an R-22 refrigerant leak on a 10+ year old unit, replacement is generally the smarter financial move – especially in Fort Worth, where a failing AC in August becomes an emergency in hours, not days.
How long does AC replacement take?
Most standard AC replacements are completed in one day, roughly 5-8 hours for a typical Fort Worth single-family home. If ductwork replacement is included, expect a second day. You’ll know the timeline before we start because it’s on the written quote.
Can you replace my AC the same day?
In many cases, yes. We keep replacement equipment for common sizes available and our schedule is built for Fort Worth heat emergencies. Call (817) 632-5499 and if we can get it done same day, we’ll tell you honestly. The price quote comes before any commitment.
What SEER rating should I choose in Fort Worth?
For Fort Worth’s climate, a 16 SEER system is the practical sweet spot for most homes: strong summer efficiency, reasonable upfront cost, and much lower operating cost than the 10-12 SEER units from fifteen years ago. Step up to 18+ SEER if you want quieter operation, tighter humidity control, and maximum energy savings over a 15-20 year lifespan.
Call Halden Heating and Air Fort Worth for a Straight Answer
If your AC is done and you’re weighing our ac repair installation services versus replace, we’ll give you an honest take. No pressure, no vague windows. Just a background-checked technician who arrives when they say they will, a written price before work starts, and a 365-Day Done Right Promise on every job.
Book online or call (817) 632-5499 now for a free replacement estimate in Fort Worth.
Written by Andre Fuller, Owner at Halden Heating and Air Fort Worth, serving Fort Worth.