Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateHVAC Company in Fort Worth, TX
Halden Heating & Air is the HVAC company Fort Worth homeowners call when they want a written price before any work starts. Fort Worth’s mix of 1920s pier-and-beam bungalows, 1970s slab ranchers, and 2000s tract homes means no two systems fail the same way, and the summer heat doesn’t give anyone a grace period. We show up with a live arrival time you can track to your door, diagnose the problem in plain English, and put the repair cost in writing before a tool is picked up. Call (817) 632-5499 any hour, any day, and a real person answers.
Why Fort Worth Homes Are Different
Fort Worth sits on the Blackland Prairie, and the housing stock tells the story of every building wave since the 1920s. In Wedgwood and Meadowbrook, you’ll find original 1970s condensers sitting exposed on the west side of homes, where afternoon sun beats on them for hours. After a spring hailstorm, those same neighborhoods are the first to need coil replacements because there’s no mature tree cover to absorb the impact.
Many Fort Worth homes are slab-on-grade ranchers with HVAC equipment jammed into hot attics. Flexible ductwork in those attics degrades faster here than almost anywhere in the metro because attic temperatures can climb past 140°F in July and August. Long duct runs across expansive lots mean systems work harder than their rated capacity suggests. Then winter brings the opposite problem: ice storms that knock out furnaces in 1970s tract homes across East Fort Worth, where original heat exchangers have already been running for 30-plus years. The same house that needs a refrigerant recharge in August may need a heat exchanger inspection in February.
What this means practically: Fort Worth HVAC work is load-sensitive, attic-heavy, and hail-driven in ways a technician who works mostly in newer northern suburbs might not anticipate. We stock the parts that fail here most often: contactors, capacitors, coil guards, and hail-rated condenser fins.
Styles & brands we work with
Our Main Fort Worth Services
Most Fort Worth calls we answer fall into one of three categories: an AC that stopped cooling during a 100-degree stretch, a system old enough that replacement makes more sense than another repair, or a furnace that won’t fire on the first cold morning. Each has its own page below.
AC Repair in Fort Worth
When your AC quits in July, waiting is not an option. Fort Worth’s 100-plus days of 90°F+ heat every year make air conditioning a survival issue, not a comfort feature. Most AC repairs in Fort Worth run between $150 and $650 depending on the failed part, and we put that number in writing before any work begins. If the repair fails within the coverage window, we come back at no charge, automatically. AC Repair in Fort Worth covers what we check, what breaks most often in this climate, and how fast we can get to you.
AC Installation in Fort Worth
Fort Worth homes built in the 1990s and early 2000s are hitting the end-of-life mark on their original systems. A new AC installation in Fort Worth typically ranges from $3,500 to $7,500, sized to the specific house, not a guess from square footage. The right size depends on attic insulation, window exposure, and whether you’re on a slab foundation with long duct runs. AC Installation in Fort Worth walks through the load calculation, the equipment options, and the fixed installation date you’ll get in writing.
Furnace Repair in Fort Worth
Fort Worth may be known for heat, but winter ice storms still happen, and when they do, a dead furnace in a 1970s rancher is a serious problem. Furnace repair in Fort Worth runs between $150 and $700 for most jobs, from flame sensor cleanings to inducer motor replacements. We service the brands most common in this market and keep the high-failure parts on our trucks. Furnace Repair in Fort Worth explains the most common winter failures and what a same-day furnace call looks like.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Fort Worth
We service all major equipment brands found in Fort Worth homes, including Carrier, Trane, Lennox, Goodman, Rheem, American Standard, York, Daikin, and Bryant. Our trucks carry the common failure parts for York, Daikin, Bryant, and American Standard systems specifically, since those show up regularly across the Fort Worth housing stock. Our brands page lists what we stock and certify on.
See the difference
Before
After
Before
After
Before
AfterPricing for HVAC Company in Fort Worth, TX
| Service | Typical range in Fort Worth |
|---|---|
| AC repair | $150 – $650 |
| Furnace repair | $150 – $700 |
| AC installation (full system) | $3,500 – $7,500 |
| Tune-up / maintenance visit | $80 – $200 |
| Refrigerant recharge | $150 – $500, depending on refrigerant type and charge amount |
| Capacitor replacement | $150 – $350 installed |
| Thermostat replacement (standard or smart) | $120 – $350 installed |
| Condenser coil replacement | $550 – $1,900, depending on unit size and hail damage extent |
| Furnace ignitor replacement | $150 – $400 installed |
Hail damage to condenser coils is the big Fort Worth-specific price driver: a coil dented by spring hail often needs full replacement rather than cleaning. The other variable is attic access. Equipment in a low-clearance, 140°F attic takes longer to service than a ground-level closet unit, and that labor difference shows up in the final number. Whatever the case, you get a written price before we start. No door-step surprises, no hidden trip charges.
Neighborhoods We Serve in Fort Worth
We cover all of Fort Worth, with crews dispatched from the Dallas-Fort Worth metro office. Here are the neighborhoods we visit most often, and where a technician likely knows your street layout without a map:
- Wedgwood – 1970s brick ranchers with original equipment hitting end-of-life
- Meadowbrook – classic east Fort Worth architecture on tree-lined streets, aging condensers
- Ridglea / Ridglea Hills – mid-century homes with long duct runs and hot attic access
- Northside – older pier-and-beam stock mixed with 1990s additions
- Far Southwest Fort Worth – large-lot suburban homes with high cooling loads
Typical response inside the city is a live arrival time you can track, not a four-hour window. We answer the phone live 24/7, and dispatch is coordinated locally.
Service Area – Cities Near Fort Worth
Halden Heating & Air also serves the communities bordering Fort Worth. If you’re in Haltom City, TX, Kennedale, TX, Keller, TX, or Euless, TX, you get the same written-price promise and live tracking on every job. Each of those pages covers the conditions specific to that area.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About HVAC Company in Fort Worth
Most calls we answer are dispatched the same day, and emergency calls are answered live around the clock. You’ll get a live arrival time you can track to your door, not a four-hour window. Call (817) 632-5499 and a real person answers.
Fort Worth requires permits for most HVAC replacements and some larger repairs. Our technicians handle the permit paperwork as part of the install or repair job so you don’t have to chase city hall. We’ll tell you upfront if the job requires a permit and include it in the written price.
Many Fort Worth HOAs have requirements about condenser placement and noise levels, especially in newer subdivisions. We work with those rules daily and can position equipment to meet HOA guidelines while still meeting manufacturer clearance requirements.
Yes. We service all of Fort Worth, from Haltom City to the edges of Benbrook, with crews based in the Dallas-Fort Worth metro. If you’re inside the Fort Worth city limits, we’ll be out to you.
When your system goes down in Fort Worth, you need a company that will put a price in writing before the work starts and show up when they say they will. Call Halden Heating & Air at (817) 632-5499 for a free estimate on any repair, installation, or tune-up.
What happens when you call
- 1A real person answersNo phone trees - talk to a local hvac pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fort Worth Customers Say
"No phone tag. Just texts, and it worked. Booking, the ETA, and the receipt were all in one thread on my phone."
- Jon P."Booked a furnace tune-up in the app, got a reminder, then a live ETA text. Tech was on time, cleaned the burners, and sent a short report to my phone."
- Greg N."They texted me a photo of the dirty coil and what was done. Easy to understand."
- Carlos D.