Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateFast, Reliable AC Installation Across Fort Worth
AC installation in Fort Worth costs between $3,500 and $7,500 for a complete system replacement. That’s the real range we quote daily across Wedgwood, Meadowbrook, Ridglea Hills, and everywhere else inside the loop and beyond. We’re Halden Heating and Air Fort Worth, and we’ve been keeping this city cool since our founding in 2004. Call (817) 632-5499 and you’ll get a written price before any work starts, a live arrival time you can track, and a technician who actually knows Fort Worth’s housing stock and storm cycles. No four-hour windows. No door-step surprises.
Why Halden Heating and Air Fort Worth Is Fort Worth’s Preferred AC Installation Company
Fort Worth homeowners call us because we run on the Relay Home Co. network’s Relay Visibility Guarantee. You book online, get a live arrival time, and track your tech to the door, the same way you’d track a rideshare. Andre Fuller leads our Fort Worth crew, and every job he oversees includes a written price delivered before a single tool gets picked up. That’s not a promotion; it’s how we’ve operated since 2004.
Our AC Installation in Fort Worth work comes with the 365-Day Done Right Promise. If something isn’t right within a full year, we make it right. Written guarantee. No arguing, no rescheduling games. For a city where 100°F days are normal from June through September, that accountability matters. We also carry a strong local reputation across Fort Worth, with background-checked, uniformed technicians who explain every step in plain English before and after the work. When a hail-battered condenser in Wedgwood needs attention at 6 a.m., we answer the phone with a live person, 24/7.
Styles & brands we work with
Furnace Installation in Fort Worth
Furnace Installation in Fort Worth isn’t something most homeowners think about until that first hard freeze in January, when a 1970s slab-on-grade rancher in East Fort Worth suddenly goes cold. Replacing a furnace here typically runs $3,500 to $7,500 when part of a full system swap, and we handle the sizing, permit paperwork, and installation while you track arrival times on your phone. Fort Worth’s older neighborhoods, especially around Wedgwood and Meadowbrook, still have original gas furnaces from the Carter and Reagan eras. When those heat exchangers crack, you need a real fix, not a patch job. We replace them correctly and hand you a written guarantee covering the entire first year.
Furnace and Heat Pump Pairing
Some Fort Worth homes are better served by a dual-fuel setup: a high-efficiency heat pump for the long shoulder seasons and a gas furnace for January nights when temperatures dip into the 20s. We’ll quote both options against your existing ductwork and electrical panel. If your home was built before 1990, we’ll also inspect whether the duct runs can handle a modern variable-speed system without leaking conditioned air into the attic.
Sizing for Fort Worth’s Freeze-Thaw Cycles
Fort Worth sees ice storms, not just heat waves. A furnace sized only for an average winter day will short-cycle and wear out early when the temperature drops hard overnight. We run a load calculation on every installation and show you the numbers. No rule-of-thumb guesses that leave a homeowner cold in February.
HVAC Installation in Fort Worth
HVAC Installation in Fort Worth means replacing both the cooling and heating sides of the system, and that’s where our AC Installation team really earns its keep. A full system swap in Fort Worth runs $3,500 to $7,500 depending on efficiency rating, ductwork condition, and whether we’re adding a heat pump or staying with a conventional split. We coordinate everything from the initial load calculation through the final permit sign-off, and you never lose phone contact because a live person answers 24/7. Fort Worth’s housing stock spans everything from 1920s pier-and-beam bungalows in Fairmount to 2000s tract homes in far north Fort Worth, and each one demands a different installation approach.
Attic Ductwork Challenges
Many Fort Worth homes built in the 1970s through 1990s run flexible ductwork through attics that hit 140°F by mid-afternoon. That degrades connections and leaks conditioned air into a space you’re not living in. We inspect every register run and replace collapsed or separated ducts before installing a new system. Otherwise you’d pay for cooling that never reaches the bedrooms on the west side of the house.
Pier and Beam Retrofit Work
Older neighborhoods like Fairmount and Ryan Place have pier-and-beam foundations with crawl spaces that complicate new line sets and condensate drainage. We’ve done enough of these Fort Worth retrofits to know where the existing chases run, what the city inspectors want to see, and how to route new copper without tearing up original wood siding. That kind of local experience isn’t something a general contractor from another market can fake.
Trusted Brands We Service in Fort Worth
Our Fort Worth technicians are certified to service and install York, Daikin, Bryant, and American Standard, among others. We stock common replacement parts locally so a failed control board or contactor on a York unit doesn’t sit on backorder while the Fort Worth heat climbs past 100°F. If you’re replacing a 1978 Rheem or Carrier condenser in Wedgwood or Meadowbrook, we’ll match the new system to your existing ductwork and electrical panel, not the other way around. And we handle the warranty registration paperwork so you don’t have to decode manufacturer fine print after a 10-hour install day.
See the difference
Before
After
Before
After
Before
AfterCommon AC Installation Problems We See in Fort Worth Homes
- Flooded outdoor condensers after flash floods: Fort Worth’s storm drains back up fast in the low-lying areas near the Trinity River. Homeowners switch the unit back on thinking it dried out, and the compressor shorts. We replace the condenser and add elevation pads or drainage correction so the next flood doesn’t kill a brand-new unit.
- Hail-battered coils on exposed west-facing condensers: Wedgwood and Meadowbrook’s 1970s homes have original Rheem and Carrier condensers sitting unprotected on the west side, where spring hailstorms hit hardest. We replace hail-damaged coils and recommend hail guards for the new equipment.
- Undersized portable generators causing voltage drop: After an ice storm kills power for days, homeowners plug a portable generator into the panel and try to run the AC. The compressor’s locked-rotor amps spike, voltage drops, and the blower motor burns out. We size standby generators correctly and wire them with an automatic transfer switch.
- Power surge damage from lightning and grid spikes: Without a surge protector on the condenser, one lightning strike near the Trinity River can fry the capacitor or control board. We install surge protection as standard on every new Fort Worth installation, because it’s cheaper than a $1,200 control board replacement in July.
Pricing for AC Installation in Fort Worth, TX
A complete AC installation in Fort Worth runs $3,500 to $7,500. Where you land in that range comes down to efficiency rating (SEER), whether you need new ductwork or can reuse existing runs, and whether we’re adding a heat pump, whole-home air purification, or surge protection. A basic 14 SEER single-stage system in a 1,500-square-foot rancher lands on the lower end. A 20 SEER variable-speed heat pump with new ductwork in a 3,000-square-foot two-story home climbs toward the top. Every quote includes a written price before work starts and the 365-Day Done Right Promise. Call (817) 632-5499 for a free estimate. No obligation, no pressure, just numbers you can actually plan around.
| AC Installation | Fort Worth Price Range |
|---|---|
| Basic 14 SEER, single-stage | $3,500 – $4,500 |
| 16 SEER, two-stage | $5,000 – $6,200 |
| 18 – 20 SEER, variable-speed | $6,500 – $7,500 |
We Also Serve Cities Near Fort Worth
Our Fort Worth crew handles AC installation in Haltom City, Kennedale, Keller, and Euless with the same written-price guarantee and live arrival tracking. If you’re a few miles outside the city limits, you still get the same 365-Day Done Right Promise and the same background-checked technicians. The Fort Worth office coordinates dispatch across the Dallas-Fort Worth area, so we’re never more than a short drive from your street.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About AC Installation in Fort Worth
No. Do not restart your AC after a Fort Worth flash flood until a licensed technician has opened the condenser and inspected it, because water inside the compressor compartment will short the windings the moment power returns. We see this every year in the neighborhoods near the Trinity River. Call (817) 632-5499 and we’ll have someone out the same day to assess the damage and give you a written repair or replacement quote.
Fort Worth’s thunderstorm season runs March through June, and a single lightning strike within a quarter mile of your home can induce a voltage spike that fries a capacitor or control board. We install a dedicated surge protector on every new condenser we put in, because the $200 part prevents a $800 – $1,200 board failure. An HVAC surge protector is not the same as the power strip in your living room; it’s a hardwired device rated for the kind of spikes that come off the Texas grid.
Most Fort Worth homes need a 14 – 20 kW standby generator to run a central AC plus lights, fridge, and well or sump pump, and the exact number comes from a load calculation, not a guess. A portable generator often cannot handle the locked-rotor amps of a compressor, which is why we see blower motors fail after ice-storm outages. Call (817) 632-5499 and we’ll size the generator and install an automatic transfer switch so the AC comes back on without you touching a thing.
A properly sized new AC handles Fort Worth’s 100°F days without running 24/7, but it has to be sized correctly for both the home’s square footage and Fort Worth’s humid subtropical climate. Undersized units fail in August; oversized units short-cycle and leave the house clammy. We run a Manual J load calculation on every install and show you the numbers. A 2,000-square-foot Fort Worth home with decent insulation typically needs a 3.5 – 4 ton unit, but the calc tells us exactly.
West Fort Worth gets the brunt of spring thunderstorms rolling in from Parker County, and repeated voltage spikes from nearby lightning degrade capacitors until they swell and fail. Homes built in the 1970s and 1980s also have aging electrical panels that don’t absorb surges the way modern panels do. We replace the capacitor, check the condenser fan motor and contactor, and install surge protection so the next storm doesn’t kill the new part. Call (817) 632-5499 and we’ll diagnose it same-day.
After a spring hailstorm in Wedgwood, we replaced a hail-battered condenser coil on a 1978 Rheem unit. We also found a swollen capacitor from a power surge and corrected the refrigerant charge while upgrading the disconnect to meet current code. The system now holds static pressure within spec and restarts safely after future outages. That’s the kind of detail-oriented work we do across Fort Worth, every single day.
If you need AC installation in Fort Worth, call (817) 632-5499 for a free estimate. You’ll get a written price, a live arrival time, and a technician who knows Fort Worth’s housing stock, storm cycles, and code requirements better than any out-of-town crew ever will.
Written by Andre Fuller, Owner at Halden Heating and Air Fort Worth, serving Fort Worth since 2004.